Highbeam X for Mercedes-Benz Vito 2024+ – Auxiliary Lights on LED Multibeam

The Mercedes-Benz Vito 2024+ with LED Multibeam (L45, LA2) uses a fully digital lighting system. There is no traditional high beam trigger wire. Highbeam X connects at the left headlight — pin 1 (Green) for CAN-L and pin 2 (Green/White) for CAN-H — and provides a 12-volt relay trigger for auxiliary lights.

LED Multibeam on Mercedes-Benz Vito 2024+

The Vito 2024+ LED Multibeam system is fully CAN bus controlled. Highbeam X accesses the headlight CAN network at pin 1 (Green, CAN-L) and pin 2 (Green/White, CAN-H) on the left headlight connector.

Installation on Mercedes-Benz Vito 2024+

Access the left headlight connector. Connect to pin 1 (Green, CAN-L) and pin 2 (Green/White, CAN-H). Route the 12-volt output to your relay. No star diagnosis, no coding required.

Auxiliary Light Compatibility

All 12-volt auxiliary lights supported: LED bars, driving lights, spotlights.

Does Highbeam X work with Mercedes-Benz Vito 2024+ LED Multibeam?

Yes. Connects at left headlight pin 1 (Green, CAN-L) and pin 2 (Green/White, CAN-H). Provides 12-volt auxiliary light trigger.

Where does Highbeam X connect on Vito 2024+?

Left headlight connector. Pin 1 (Green) = CAN-L, Pin 2 (Green/White) = CAN-H.

Is Star Diagnosis required?

No. Highbeam X is read-only and requires no dealer coding.

Will Highbeam X affect my warranty?

No. Highbeam X is a read-only device and does not modify or communicate with any vehicle systems. It is completely non-invasive and reversible.