Highbeam X for Hyundai Ioniq 5 2026+ – Auxiliary Lights via CAN Bus

The Hyundai Ioniq 5 2026+ features LED IFS (Intelligent Front lighting System) with no traditional high beam trigger wire. Highbeam X connects at the left kickpanel plate via the MF 11 connector (74-pin) — Red wire for CAN-H, Blue wire for CAN-L — and outputs a 12-volt relay trigger for auxiliary lights.

LED IFS and CAN Bus on Hyundai Ioniq 5 2026+

The Ioniq 5 2026+ uses a fully digital LED IFS system. High beam activation is a CAN message — no physical trigger wire exists. Highbeam X accesses the CAN bus at the 74-pin MF 11 connector on the left kickpanel.

Installation on Hyundai Ioniq 5 2026+

Locate the MF 11 (74-pin) connector at the left kickpanel plate. Connect to Red (CAN-H) and Blue (CAN-L). Route the 12-volt output to your relay. No coding required.

Auxiliary Light Options

All 12-volt auxiliary lights are compatible: LED bars, driving lights, spotlights.

Does Highbeam X work with Hyundai Ioniq 5 2026+?

Yes. Highbeam X connects at the left kickpanel MF 11 connector (74-pin) and provides a 12-volt auxiliary light trigger.

Where exactly does Highbeam X connect on Ioniq 5 2026+?

Left kickpanel plate, MF 11 connector (74-pin). Red wire = CAN-H, Blue wire = CAN-L.

Does Highbeam X require coding on Hyundai Ioniq 5?

No. Read-only operation, no coding required.

Will Highbeam X affect my warranty?

No. Highbeam X is a read-only device and does not modify or communicate with any vehicle systems. It is completely non-invasive and reversible.

Does it affect the EV battery?

No. Highbeam X has minimal power consumption.