Highbeam X for Ford E-Courier 2023+ – Auxiliary Lights on Electric Van

The Ford E-Courier 2023+ electric van uses CAN bus for all lighting control. Highbeam X connects under the glovebox — Blue wire for CAN-H, White wire for CAN-L — and provides a 12-volt relay trigger for auxiliary lights.

EV Lighting on Ford E-Courier 2023+

The E-Courier uses CAN bus lighting control identical to the ICE Courier. Highbeam X reads the high beam signal at the CAN wires under the glovebox without affecting EV systems.

Installation

Access the wiring harness under the glovebox on the right side. Splice onto the Blue (CAN-H) and White (CAN-L) wires. Connect the 12-volt output to your relay. No coding, no OBD2 connection required.

Auxiliary Light Options

All 12-volt lights supported. Minimal power draw suitable for EV use.

Does Highbeam X work on Ford E-Courier 2023+?

Yes. Highbeam X connects under the glovebox — Blue wire (CAN-H) and White wire (CAN-L) — and provides a 12-volt trigger for auxiliary lights.

Where does it connect on E-Courier?

Under the glovebox on the right side. Blue wire is CAN-H, White wire is CAN-L.

Does installation require coding?

No. Highbeam X is read-only and requires no coding or dealer tools.

Will Highbeam X affect my warranty?

No. Highbeam X is a read-only device and does not modify or communicate with any vehicle systems. It is completely non-invasive and reversible.

Does it affect the EV battery?

No. Highbeam X has minimal power consumption.