Highbeam X for Ford Courier 2023+ – Auxiliary Lights via CAN Bus

The Ford Courier 2023+ uses automatic halogen lighting controlled via CAN bus. There is no accessible high beam trigger wire. Highbeam X connects under the glovebox on the right side — Blue wire for CAN-H, White wire for CAN-L — and provides a 12-volt relay trigger for auxiliary lights.

CAN Bus on Ford Courier 2023+

Despite halogen bulbs, the Ford Courier 2023+ uses digital CAN bus control for lighting activation. Highbeam X taps onto the CAN wires under the glovebox (Blue: CAN-H, White: CAN-L) and reads the high beam signal in listen-only mode.

Installation

Access the wiring harness under the glovebox on the right side. Splice onto the Blue (CAN-H) and White (CAN-L) wires. Connect the 12-volt output to your relay. No coding, no OBD2 connection required.

Auxiliary Light Options

All 12-volt auxiliary lights supported. LED bars, driving lights, spotlights — all work via the relay output.

Does Highbeam X work with Ford Courier 2023+?

Yes. Highbeam X connects under the glovebox — Blue wire (CAN-H) and White wire (CAN-L) — and provides a 12-volt trigger for auxiliary lights.

Where exactly does Highbeam X connect on Ford Courier 2023+?

Under the glovebox on the right side. Blue wire is CAN-H, White wire is CAN-L.

Does installation require coding?

No. Highbeam X is read-only and requires no coding or dealer tools.

Will Highbeam X affect my warranty?

No. Highbeam X is a read-only device and does not modify or communicate with any vehicle systems. It is completely non-invasive and reversible.