Highbeam X for Citroën Jumpy 2016–2024 – Auxiliary Lights via CAN Bus

The Citroën Jumpy (2016–2024) uses a digital LED lighting system with no traditional high beam trigger wire. Highbeam X connects at the OBD2 port — pin 6 for CAN-H and pin 14 for CAN-L — or alternatively at the BodyCAN connector. It reads the high beam signal and outputs a clean 12-volt trigger for any auxiliary lighting relay.

Why You Need Highbeam X on Citroën Jumpy 2016–2024

The Jumpy's LED lighting system communicates over CAN bus only. There is no accessible 12-volt wire that activates with the high beam. Highbeam X reads the CAN signal at OBD2 pin 6 (CAN-H) and pin 14 (CAN-L) and creates a usable 12-volt relay trigger.

Installation on Citroën Jumpy 2016–2024

Connect Highbeam X to OBD2 pin 6 (CAN-H) and pin 14 (CAN-L) under the dashboard. An alternative connection point is the BodyCAN connector elsewhere in the vehicle. No coding, no dealer tools, no splicing into headlight wiring required.

Compatible Auxiliary Lights

All 12-volt auxiliary lights are supported: LED bars, driving lights, spotlights, and work lights. Works with all relay configurations and light brands.

Does Highbeam X work with Citroën Jumpy 2016–2024?

Yes. Highbeam X connects at OBD2 pin 6 (CAN-H) and pin 14 (CAN-L) on the Citroën Jumpy 2016–2024 and provides a 12-volt relay trigger for auxiliary lights.

Where does Highbeam X connect on Citroën Jumpy?

At the OBD2 port under the dashboard — pin 6 for CAN-H, pin 14 for CAN-L. An alternative connection is available at the BodyCAN connector.

Does installation require coding on Citroën Jumpy?

No. Highbeam X is read-only and requires no coding or dealer tools.

Will Highbeam X affect my warranty?

No. Highbeam X is a read-only device and does not modify or communicate with any vehicle systems. It is completely non-invasive and reversible.