Highbeam X for Citroën ë-Jumpy – Auxiliary Lights on Electric Van

The Citroën ë-Jumpy electric van uses a fully digital LED lighting system. There is no 12-volt high beam wire to tap. Highbeam X connects at OBD2 pin 6 (CAN-H) and pin 14 (CAN-L), reads the high beam CAN signal, and outputs a 12-volt relay trigger for auxiliary lights.

CAN Bus on Citroën ë-Jumpy

As an EV, the ë-Jumpy uses CAN bus for all vehicle systems including lighting. The high beam signal is a digital CAN message — Highbeam X reads it at OBD2 pin 6/14 and creates the 12-volt output your relay needs.

Installation on Citroën ë-Jumpy

Connect at OBD2 pin 6 (CAN-H) and pin 14 (CAN-L) under the dashboard. Alternative: BodyCAN connector. No coding, no EV-specific tools required.

Auxiliary Light Compatibility

All 12-volt auxiliary lights are compatible. Highbeam X is designed for EV use and has minimal power consumption.

Does Highbeam X work with Citroën Jumpy 2016–2024?

Yes. Highbeam X is compatible with the ë-Jumpy EV platform and connects at OBD2 pin 6/14.

Where does Highbeam X connect on Citroën Jumpy?

At the OBD2 port under the dashboard — pin 6 for CAN-H, pin 14 for CAN-L. An alternative connection is available at the BodyCAN connector.

Does installation affect the EV battery?

No. Highbeam X has minimal power draw and does not affect range or battery systems.

Will Highbeam X affect my warranty?

No. Highbeam X is a read-only device and does not modify or communicate with any vehicle systems. It is completely non-invasive and reversible.