Highbeam X for Citroën Berlingo 2025+ – Driving Lights via CAN Bus

Citroën Berlingo 2025+ features LED headlights with no traditional high beam trigger wire. Highbeam X connects at OBD2 pin 6 (CAN-H) and pin 14 (CAN-L) and provides a 12-volt relay trigger for auxiliary lights.

LED Lighting and CAN Bus on Citroën Berlingo 2025+

The Berlingo 2025+ LED system operates entirely digitally via CAN bus. Highbeam X reads the high beam activation signal at OBD2 pin 6/14 without interfering with vehicle systems.

Installation on Citroën Berlingo 2025+

Plug into OBD2 pin 6 (CAN-H) and pin 14 (CAN-L). Alternative connection available at the BodyCAN connector. No coding required.

Auxiliary Light Options

All 12-volt auxiliary lights are supported including LED bars, driving lights, and spotlights.

Does Highbeam X work with Citroën Berlingo 2025+?

Yes. Highbeam X is compatible with the ë-Jumpy EV platform and connects at OBD2 pin 6/14.

Where does Highbeam X connect on Citroën Berlingo 2025+?

OBD2 pin 6 (CAN-H) and pin 14 (CAN-L) under the dashboard. Alternative: BodyCAN connector.

Is coding required?

No. Highbeam X is read-only and plug-and-play with no coding.

Will Highbeam X affect my warranty?

No. Highbeam X is a read-only device and does not modify or communicate with any vehicle systems. It is completely non-invasive and reversible.